clinker grinder introduction:
mining
clinker grinder is a leading word level industrial mill. It is designed by our engineers and technical workers, basing on many years industrial mill design, adopting world leading powder making technology. Our machine adopts numbers of national patents of mill, such as trapezium working surface, flexible connection, roll linked pressure boost, etc. It has totally covered many defects of traditional mill, like application, capacity, fineness, energy consumption, service life, etc and it is the ideal substitute of traditional mill, such as Raymond mill, high pressure suspension mill, ball mill, etc.
Nowadays, it has been widely used in electric power coal industry, fireproofing, etc. and it has achieved large economic benefits and social benefits.
Application Scope of clinker grinder
It is ly applied to the pulverization in various industries such as metallurgy, construction material, chemical, mining beneficiation and other relative ones. This series mills are proven to be used to process various non-flammable and non-explosive minerals with Mohs hardness below 9 and humidity blow 6%,the common materials are silica, feldspar, calcite, talcum, limestone, dolomite, barite, gypsum, bentonite, fluorite, clay ect. You are welcome to consult our sales engineers if the material that you are planning to process is not listed above
Working principle of clinker grinder
After the materials enter the grinding chamber of the main frame, the grinding roller swings outward and presses closely upon the grinding ring due to the centrifugal force generated by the rotation of the main shaft. The blade carries materials to the space between the grinding roller and grinding ring, and materials are ground as the grinding roller rolls. After being ground, the powder is selected by classifier via the cycle wind of the blower and the rough powder will be back to the grinding chamber for regrinding.
Technology Advantages of clinker grinder
1. Exquisite appearance.
2. The whole bevel gear transmission.
3. Internal thin oil lubrication system.
4. curved duct.
5. Curved surface shovel with exchangable blade.
6. Isolated cyclone collector.
7. No resistance inlet volute (small observation door without vortex).
8.The key components such as roller and ring of MTW series trapezium mill adopt stong wear resistant material.
Finished Products :
Specifications of clinker grinder
Name & Model | MTW110 | MTW138 | MTW175 | MTW215 |
Ring Roller Number(pcs) | 4 | 4 | 5 | 5 |
Major diameter of roller(mm) | 360×190 | 460×240 | 520×280 | 640x 320 |
Inner diameter of roller (mm) | 1100×190 | 1380×240 | 1750×280 | 2150x 320 |
Revolving Speed(rmin) | 120 | 96 | 75 | 65 |
Max.Feed Size(mm) | <30 | <35 | <40 | <50 |
Final size(mm) | 1.6-0.045, fineness can reach to 0.038 | 1.6-0.045, fineness can reach to 0.038 | 1.6-0.045, fineness can reach to 0.038 | 1.6-0.075, fineness can reach to 0.038 |
Capacity(th) | 3.5-10 | 6.5-15 | 13-20 | 30-45 |
Overall dimension(mm) | 8625×7933×8642 | 10920×9470×10227 | 12275×9555×9916 | 14730x 10860x 10341 |
Main unit motor | Model | Y280M-6 | Y315M-6 | Y355M2-8 |
Power(kw) | 55 | 90 | 160 | 280 |
Rotate Speed(rmin) | 980 | 990 | 740 | 740 |
Classifier speed regulating motor (variable frequency motor) | Model | Y132M-4 | Y180M-4 | Y200L-4 |
Power(kw) | 7.5 | 18.5 | 30 | 90 |
Rotate Speed(rmin) | 1440 | 1470 | 1470 | 1470 |
Centrifugal induced draft fan motor | Model | Y250M-4 | Y315-4 | Y315L2-4 |
Power(kw) | 55 | 110 | 200 | 315 |
Rotate Speed(rmin) | 1480 | 1480 | 1480 | 1480 |
Elevator | Bucket Model | TH210 | TH315 | TH315 |
Motor Model | Y100L2-4 | Y112M-4 | Y112M-4 | Y160M-4 |
Motor Power(kw) | 3 | 3 | 4 | 11 |
Rotate Speed(rmin) | 1430 | 1430 | 1440 | 1440 |
Jaw Crusher | Model | PE250×400 | PE250×750 | PE250×750 |
Motor Model | Y180L-6 | Y200L2-6 | Y200L2-6 | Y315M2-6 |
Power(kw) | 15 | 22 | 22 | 110 |
Rotate Speed(rmin) | 970 | 970 | 970 | 990 |
Magnetic Vibrating Feeder | Model | GZ2F | GZ3F | GZ4F |